You are here:Home » Solutions » Tiny Prefab Hosue

Prefabricated T House

Prefabricated T house is made of the square tube or flat tube as main steel structure and C shape steel and other materials as auxiliary steel structure. Sandwich panel for wall and roof. The house is usually used as worker’s accommodation, temporary office, meeting room, etc.

Advantage Introduction

Beautiful appearance.

Flexible size and style.

Based on steel structure and screw connection, the overall flexibility is good, and it can withstand earthquakes of.

magnitude 7-8.

The price is economical and the installation is fast.

Application

Engineering Camp
Government Resettlement
Disaster Relief
Municipal Temporary Housing
Temporary Housing

Usual Foundation Types

Pre-embedded parts are needed in the first step of building a good foundation.

If the project belongs to a multi-storey building, pre-Piling is required.

We will provide corresponding drafts of foundation according to different projects.

Material Selection

Steel Column
Roof Frame Beam
Ring Beam
accessories
door panel
EPS roof panel
EPS wall panel
galvanized geosyncline
plywood
roof purlin
UPVC Windows
Size & Density:

1)Density:6/7/8/9/10/12kg/m³.

2)Thickness: 50mm/75mm/100mm.

3)Roof panel's size: Length * 1050 * thickness.

4)Wall panel's size: Length * 1150 * thickness.

Wave steel sheet:

Corrugated steel sheet, 840#is for the roof,900# is for the wall.

1)Thickness: 0.376mm/0.426mm/0.476mm.

2)Size:same as the above.

EPS

Feature:

1)Lightweight.

2)Not friendly environmental.

3)Goodsound insulation :It's a great material for keeping noise from entering your home.

4)Low water absorption :EPS is resistant to moisture.

5)Non-fire resistant:EPS is flammable, as is the case with so many other building materials. However, this is only relevant if you assess EPS as an exposed insulating material.

Size & Density:

1)Density:40kg/m³.

2)Thickness : 50mm/75mm/100mm.

3)Roof panel's size: Length * 960 * thickness.

4)Wall panel's size: Length * (1150/950) * thickness.

Wave steel sheet:

Corrugated steel sheet, 840#is for the roof,900# is for the wall.

1)Thickness: 0.376mm/0.426mm/0.476mm.

2)Size:same as the above.

Glass wool

Feature:

1)Friendly environmental :glass wool generally have lower environmental impacts than foam plastic insulation materials

2)Optional heat retainer & sound-deadening :Retains heat well and traps air, which slows the transfer of heat and sound.

3)Fire resistance :Glass wool is non-combustible as mineral wool. However ,mineral wool has far better fire resistant qualities than glss wool.

4)Bad water repellent : Wet insulation in a closed wall cavity will usually not rapidly dry out.However, if it can dry out and has not become compacted, it will retain its insulating properties.

Size & Density:

1)Density: 60/80/100/120kg/m³

2)Thickness: 50mm/75mm/100mm.

3)Roof panel's size: Length * 960 * thickness.

4)Wall panel's size: Length * (1150/950) * thickness.

Wave steel sheet:

Corrugated steel sheet, 840#is for the roof,900# is for the wall.

1)Thickness: 0.376mm/0.426mm/0.476mm.

2)Size:same as the above.

Rock wool

Feature:

1)Friendly environmental :Made from natural, sustainable material.Typically contains up to 75 percent recycled content.

2)Great heat retainer & sound-deadening : it doesn't allow heat to transfer through it very easily.

3)Fire resistan:Non-combustible and fire resistant to about 1,400 degrees,which is greater than glass wool.

4)Highly water repellent :Any bulk water that contacts the outer surface will drain and not be absorbed into the body of the insulation.

5)Long-term performance :rock wool doesn’t degrade over time and allows moisture to escape ,which deters mold and mildew.

Indoor Scene

Installation Process

Make the foundation
1

Make the foundation

Install the ground
2

Install the ground

Install steel frame
3

Install steel frame

Install wall panel
4

Install wall panel

Install partition wall panel
5

Install partition wall panel

Install roof panel
6

Install roof panel

Install door panel
7

Install door panel

Install windows
8

Install windows

Finish
9

Finish

Packaging

Successful Cases

Case 1: Project located Namibia

Program details

  • Size:70m x 5m x 3m (10 building)
  • Application: Military Camp housing
  • Total building area: 3500 sqm
  • Get order time: March, 2012 & May, 2014
  • Material use: steel structure +EPS panel
  • Finished time: May, 2012 & July 2014

Your team are professional team, thanks offer us good quality structure steel frame and EPS wall&roof panel.we are according the installation guidance is easy to assemble the project.our army satisfaction live in these camp housing.

Leave a message

We usually respond within 12 hours, or faster.